Showing all 3 results
The answer to the question will gradually be obtained in practice. Cheap forklifts can complete simple tasks well if the load requirements are not particularly high, or you do not often load heavy items, or you only use it occasionally in daily life.
An expensive forklift will certainly have better mechanical performance, life and maintenance, but the high price is worth it for large projects, companies, and groups that use it frequently. But the consumer groups I want to talk about are not just those. If you really want to own a forklift, but you don’t have your own company, don’t need it to make money, and don’t want to pay a lot of money because it’s not worth it, then a cheap forklift is a good choice.
We have to admit that cheap forklifts cannot catch up with high-end forklifts in terms of configuration, just like POLO and Mercedes-Benz in cars. But for different models, people have different choices. How to make life and work easy and stress-free? A cheap China forklift is a very good choice.
Can cheap China forklifts adapt to the international market?
The answer is yes. Chinese forklifts are very stable and the battery life is good. As for after-sales service, because overseas customers are far away from China, it is not convenient to go to the site for repairs if there is a problem. This is indeed a headache, especially with the time difference and inconvenience of mobile phone communication. If the customer only verbally describes the problem, it will be difficult for the factory to determine what went wrong.
However, if the customer can provide video materials in time and can operate step by step according to our prompts, the problem is likely to be solved through the video. Parts that need to be replaced will be sent by international express. I think after-sales service is a hassle, but it is not without a solution.
Of course, cheap forklifts also have disadvantages, because after all, the configuration saves costs. You can’t have it both ways, and everyone understands this truth. However, friends who have purchased Chinese products may feel that Chinese products are sometimes really cheap and good. A cheap China forklift can also accompany you for many years, until one day you don’t like it anymore, haha, you can buy a new one.
If it is you, how would you choose? I think this question is not difficult. It depends on your own situation. If it is for leasing, we still recommend purchasing a forklift with higher value, after all, it is used to make money for you.
When I finished writing this article, I didn’t know what to write anymore. I had to write 600 words to get 90 points.
Forklifts have different prices and different needs. For batteries, they can be lead-acid batteries or lithium batteries. You can also install cameras. As for our customers, we have customers with various needs, which is the meaning of our work and what arouses our interest.
Both lithium batteries and lead-acid batteries have their own advantages and disadvantages. At present, we can only say that their demand is about half and half. Do you prefer a lithium battery China forklift or a lead-acid battery China forklift? Welcome to send me your needs and preferences. I like to listen and hope to get to know you.
1. Rated Lift Capacity: pallet forklifts’s rated lift capacity is the maximum weight of cargo permitted to be lifted when the distance between the center of gravity of the load and the front wall of the forks is no greater than the load center distance (CCD). It is expressed in tons (T).
If the center of gravity of the load on the forks exceeds the specified CCD, the lift capacity should be reduced accordingly due to the limitations of the forklift’s longitudinal stability.
2. CCD: The CCD refers to the horizontal distance (T) between the center of gravity of a standard load and the front wall of the vertical section of the forks, expressed in millimeters. For 1T to 4T forklifts, the specified CCD is 500mm.
3. Maximum Lift Height: The maximum lift height is the vertical distance between the upper surface of the horizontal section of the forks and the horizontal surface of the forklift, when the forklift is fully loaded and the load is raised to its highest position, on a flat, solid surface.
4. Mast Tilt: The mast tilt refers to the maximum forward or backward tilt of the mast relative to its vertical position when the forklift is unloaded and on a flat, solid surface. The forward tilt angle facilitates the picking up and unloading of cargo; the rearward tilt angle prevents cargo from sliding off the forks when the forklift is operating with cargo. Pallet forklifts typically have a forward tilt angle of 3° to 6°, and a rearward tilt angle of 10° to 12°.
5. Maximum Lifting Speed: The maximum lifting speed of a forklift is typically the maximum speed at which cargo can be lifted when fully loaded, expressed in meters per minute (m/min). Increasing the maximum lifting speed can improve operational efficiency, but lifting at excessive speeds can easily lead to cargo damage and machine damage. The maximum lifting speed of domestic forklifts has been increased to 20 m/min.
6. Maximum Travel Speed: Increasing travel speed significantly impacts the operating efficiency of pallet forklifts. For an internal combustion forklift with a lifting capacity of 1 ton, the minimum travel speed when fully loaded should be no less than 17 m/min.
7. Minimum Turning Radius: When a forklift is unloaded and traveling at low speed with the steering wheel fully engaged, the minimum distances from the outermost and innermost sides of the vehicle body to the center of the turn are called the minimum outer turning radius (Rminouter) and the minimum inner turning radius (rmininer), respectively. The smaller the minimum outer turning radius, the less ground area the forklift requires to turn, and the better its maneuverability.
8. Minimum Ground Clearance: Minimum ground clearance refers to the distance from the lowest fixed point on the vehicle body, excluding the wheels, to the ground. It indicates the forklift’s ability to navigate raised obstacles without collision. The greater the minimum ground clearance, the better the forklift’s maneuverability.
9. Wheelbase and Track: The forklift’s wheelbase is the horizontal distance between the centerlines of the forklift’s front and rear axles. The pallet forklifts is the distance between the centers of the left and right wheels on the same axle. Increasing the wheelbase improves the forklift’s longitudinal stability, but increases the vehicle’s length and minimum turning radius. Increasing the track improves the forklift’s lateral stability, but increases the overall width and minimum turning radius.
10. Minimum Right-Angle Aisle Width: The minimum right-angle aisle width refers to the minimum width of the aisles intersecting at right angles for forklifts to travel back and forth. Expressed in mm. Generally, the smaller the minimum right-angle aisle width, the better the performance.
11. Minimum Stacking Aisle Width: The minimum stacking aisle width is the minimum width of the aisle during normal forklift operation.
No products in the cart.
